Electric Boffins needed

[gnasher]

Hi
ich hab aus vorsehen 2 Kippschalter gekauft:

Kippschalter ON-OFF-ON 12 mm 2-polig 10A
http://www.oldtimerbedarf.de/index.php

unten ist 6 verbindung Schrauben, kann jemand mir sagen welche kabel geht wo ?

vlt eine schematic ?

[Diesel]

Hi Gnasher,
the link is going to the homepage, not to the switch you selected.
Anyhow, you should have 3 contacts (ON, OFF ,ON) on the backside of the switch.
If you connect the positive lead comming from the fuse to the middle contact. Then you got the option either to use the top or bottom contact going to for example the lamp or whatever you want to switch ON/OFF.

So what is the purpose for the Switch ?

A photo or the link to the switch would help
...

[gnasher]

http://www.oldtimerbedarf.de/Kippschalt ... -polig-10A

http://www.oldtimerbedarf.de/bilder/pro ... ig-10A.jpg

it has 6 poles , so the main power (from battery) goes to the middle two (if needed) and the 4 other poles (of which you use 1 pole) goes to the lamp for example.

only for the red / Blue lamps in the back, and another switch for the lamp in the front.

[Diesel]

http://www.oldtimerbedarf.de/Kippschalt ... -polig-10A

http://www.oldtimerbedarf.de/bilder/pro ... ig-10A.jpg

it has 6 poles , so the main power (from battery) goes to the middle two (if needed) and the 4 other poles (of which you use 1 pole) goes to the lamp for example.

only for the red / Blue lamps in the back, and another switch for the lamp in the front.

Yes that should work, but make shure you got a fuse in the cable coming from the battery
http://www.oldtimerbedarf.de/Kfz-Sicher ... -Sicherung
something like this or similar.

Cheers

[gnasher]

does that mean i can power 4 units with this switch

[Diesel]

does that mean i can power 4 units with this switch

Well, the feed from the battery is on the middle contacts, if the switch is in middle position it is Off.
If you put the switch up, you should get power to what you have connected to the top contact, if you put the switch to the down position you have power on the down contact, top contact will then have no power.

Yes should be possible to connect 4, I assume the contacts side by side are just parralel. If you have a tester it's easy to verify.
How many you can connect is more depending on the electrical power (Watt) your lamps will draft.

Cheers
Hope that helps

[gnasher]

Yo thanks a lot.



Gesendet von mx. Landy